Petrobras Completes Drilling of Fifth Well in Santos Basin Pre-Salt Iara Area

Petrobras Completes Drilling of Fifth Well in Santos Basin Pre-Salt Iara Area

Petrobras announces it has completed drilling the fifth exploratory well in the Santos Basin pre-salt Iara area, block BM-S-11.

Well 3-RJS-715D (3-BRSA-1181D-RJS), informally known as Iara Alto Ângulo (‘Iara steep angle’), is located 225 km off the Rio de Janeiro coast, at a water depth of 2,128 meters.

This well was drilled in the central area of the concession’s Discovery Evaluation Plan, some 4 km to the north of discovery well 1-RJS-656 (1-BRSA-618), informally known as Iara.

The well was designed and executed with a sub-horizontal geometry and reached the total depth of 6,672m, after drilling approximately 900 meters of carbonate rock below the salt layer. A 310 meter hydrocarbon column was identified.

The reservoirs feature characteristics that are similar to those found in discovery well (1-RJS-656, Iara), which was drilled vertically, and where good quality oil was identified (28º API).

Given the geometry used in the well, a formation test will be conducted at the location to evaluate the productivity of the reservoirs.

The consortium will proceed with the activities outlined in the Discovery Evaluation Plan approved by Brazil’s National Petroleum, Natural Gas and Biofuels Agency (ANP).

Petrobras is the operator of the consortium (65%) in partnership with BG E&P Brasil (25%) and Petrogal Brasil (10%).

Press Release, November 13, 2013

Share this article

Follow Subsea World News

Events>

<< May 2016 >>
MTWTFSS
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3 4 5

Seawork International 2016

This event showcases product from Railway, Shipping & Aviation industry.Seawork International is the largest and fastest growing international…

read more >

EEMUA subsea engineering course: materials selection and corrosion control

This two and a half day training course is recommended for both discipline and project focused engineers from a variety of backgrounds who want to gain an understanding of the fundamental principles for selecting and specifying materials of construction for subsea equipment, and for corrosion control during deployment, commission and operation. The course is based on the EEMUA User Guide to subsea materials selection and corrosion control, EEMUA Publication 194.

It is operated in association with the Society for Underwater Technology (SUT). Permanent employees of EEMUA and SUT member companies are entitled to a 20% discount off the standard course fee.

More info

read more >

5th International Conference Offshore Cabling 2016

At the upcoming event you will get the opportunity to learn from offshore cable installation case studies and gain insights into latest…

read more >

OPEX Global Subsea Power Cables Forum for the O&G and Energy Industry 2016

This year subsea power cable forum will bring together key experts from Oil and Gas and Energy Industry globally to discuss the current…

read more >