Lundin Hits Rolvsnes Oil Off Norway

Lundin Petroleum has completed the Rolvsnes exploration well 16/1-25 S as an oil discovery.

The well is located in PL338C south of the Edvard Grieg field in the central North Sea sector of the Norwegian Continental Shelf (NCS).

The well encountered a gross oil column of 30 metres in porous granitic basement. Pressure data and oil type indicate that the petroleum system is in communication with the Edvard Grieg South discovery which was made by Lundin Norway in 2009. Extensive data acquisition and sampling was carried out in the reservoir including conventional coring and fluid sampling.

A production test (DST) was performed, achieving a production rate of 265 barrels of oil per day through a 36/64” choke.

The gross contingent resource range for Rolvsnes, based on natural depletion drive, including the Edvard Grieg South discovery is estimated to be between 3 and 16 million barrels of oil equivalents (MMboe). There remains significant resource upside including potential to find a more extensive fracture network and secondary recovery potential. Including this prospective upside potential the total gross resource estimate is between 10 and 46 MMboe, Lundin informed through a press release.

Exploration well 16/1-25 S is the second well drilled in PL 338C, which was carved out from PL338 in late 2014.

Well 16/1-25 S was drilled to a total depth of 2,096 metres below mean sea level in a water depth of 106 metres. The well was drilled using the semi-submersible drilling rig Bredford Dolphin and will be permanently plugged and abandoned.

Lundin Norway is the operator of PL338C with 50 percent working interest. The partners are Lime Petroleum Norway with a 30 percent working interest and OMV (Norge) AS with 20 percent working interest.

Share this article

Follow Subsea World News

Events>

<< May 2016 >>
MTWTFSS
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3 4 5

OPEX Global Subsea Power Cables Forum for the O&G and Energy Industry 2016

This year subsea power cable forum will bring together key experts from Oil and Gas and Energy Industry globally to discuss the current…

read more >

Offshore Arabia Conference and Exhibition

The event brings together Industry Professionals from all over the world to discuss the strategic, operational and technological developments…

read more >

Deep Sea Mining Summit 2016

The Deep Sea Mining Summit 2016 will bring together a large array of solution providers, upcoming deep sea miners, members from…

read more >

EEMUA subsea engineering course: materials selection and corrosion control

This two and a half day training course is recommended for both discipline and project focused engineers from a variety of backgrounds who want to gain an understanding of the fundamental principles for selecting and specifying materials of construction for subsea equipment, and for corrosion control during deployment, commission and operation. The course is based on the EEMUA User Guide to subsea materials selection and corrosion control, EEMUA Publication 194.

It is operated in association with the Society for Underwater Technology (SUT). Permanent employees of EEMUA and SUT member companies are entitled to a 20% discount off the standard course fee.

More info

read more >