Cable Installed at Experimental Offshore Floating Wind Farm Project

A consortium comprising of Marubeni (project integrator), the University of Tokyo (technical advisor), Mitsubishi, Mitsubishi Heavy Industries, Japan Marine United, Mitsui Engineering & Shipbuilding, Nippon Steel & Sumitomo Metal Corporation, Hitachi, Furukawa Electric, Shimizu, and Mizuho Information & Research have been participating in an experimental offshore floating wind farm project sponsored by the Ministry of Economy, Trade and Industry since March 2012.

At present, the installation work of 2MW downwind-type floating wind turbine, 66kV floating power sub-station, extra-high voltage undersea cable and the dynamic cable at the testing area (1st phase) have been successfully completed and commenced operations today.

The experimental study of 2MW downwind-type floating wind turbine, 66kV floating power sub-station commenced today. The evaluation of safety, reliability and economic potential of the offshore floating wind farm through the collection and analysis of meteorological data, hydrographic data and performance data will be carried out during the experimental study. In addition, we are targeting to establish the method of operation and maintenance of the offshore floating wind farm at the same time. At the 2nd phase, the 2 unit of 7MW oil pressure drive-type floating wind turbine will be installed within fiscal year 2014 and the total capacity of the offshore floating wind farm will be 16MW, making it the world’s biggest floating offshore wind farm.

During this experimental study that will be carried out until the fiscal year 2015, the following aims should be achieved:

- The creation of offshore wind-related industry

- Development of offshore wind facilities as Japan’s new export industry

- Coexistence with the fisheries

Press Release, November 11, 2013

 

Share this article

Follow Subsea World News

Events>

<< May 2016 >>
MTWTFSS
25 26 27 28 29 30 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31 1 2 3 4 5

EEMUA subsea engineering course: materials selection and corrosion control

This two and a half day training course is recommended for both discipline and project focused engineers from a variety of backgrounds who want to gain an understanding of the fundamental principles for selecting and specifying materials of construction for subsea equipment, and for corrosion control during deployment, commission and operation. The course is based on the EEMUA User Guide to subsea materials selection and corrosion control, EEMUA Publication 194.

It is operated in association with the Society for Underwater Technology (SUT). Permanent employees of EEMUA and SUT member companies are entitled to a 20% discount off the standard course fee.

More info

read more >

Offshore Technology Conference (OTC)

The Offshore Technology Conference (OTC) is where energy professionals meet to exchange ideas and opinions to advance scientific and technical…

read more >

All-Energy 2016

All-Energy is held in Glasgow annually. In its 15th year, it has firmly established itself as the UK’s leading renewable energy exhibition…

read more >

Offshore Arabia Conference and Exhibition

The event brings together Industry Professionals from all over the world to discuss the strategic, operational and technological developments…

read more >